 |
 |
 |
|
Effective mold cleaning with PerOxy Kling Mold Cleaner
Hydrogen Peroxide Mold removal product
PerOxy Kling Mold Cleaner Advantages:
- No Chlorine Bleach
- Environmentally Safe
- Oxygen Powered Peroxide Mold Cleaner
- Meets Or Exceeds Green Seal & DFE Compliance Standards
- Hydrogen Peroxide Mold Cleaner and General Degreaser
Hydrogen Peroxide: Harness the power of Oxygen in a Mold Cleaning product
MoldSTAT PerOxy Kling is specially designed to cling to mold stains on vertical surfaces while addressing the environmental, safety and health concerns facing today's housekeeper and facility maintenance professional.
Clinging to surfaces longer improves mold removal results.
Strong highly fortified hydrogen peroxide mold and mildew cleaning formulation is color safe . Hydrogen Peroxide releases Oxygen Mold Cleaning power.
Oxidizes soils, mold stains and bacteria while eliminating associated odors leaving a fresh pleasant smell
MoldSTAT PerOxy Kling is safe!
Mold Cleaner PerOxy Kling contains no acids, amonia, phosphates!
Powered by hydrogen peroxide, Per Oxy Kling releases Oxygen as a Mold Cleaner
There are no caustics, butyl or glycol ethers,
PerOxy Kling is a powerful Mold Cleaner without silicones, chelating agents or dyes.
PerOxy Kling for Versatile Mold Cleaning
Oxygen power MoldSTAT PerOxy Kling for mold stain removal on walls, floors, tile and grout, carpets, stainless steel, chrome, porcelain, concrete
Exterior housing surfaces and roofs are safe for Oxygen Mold Cleaner PerOxy Kling.
Clinging Property Allows longer saturation with Active Ingredients
Clean, Kill and Prevent Mold
Mold Cleaners remove surface mold, but do not kill mold. After Cleaning mold with MoldSTAT PerOxy Kling you will be ready to kill the mold. Choose between two Mold Killing Products:
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
How to use PerOxy Kling on:
HARD SURFACES
Spray MoldSTAT PerOxy Kling on surface; agitate with cloth or brush if needed.
Rinse with water.
Wipe dry with clean cloth or paper towel.
KITCHEN AND HOUSEHOLD SURFACES
Spray MoldSTAT PerOxy Kling on stain and rub in gently.
For tough stains, scrub with sponge.
Rinse thoroughly with water and allow to dry.
TILE AND GROUT
Spray MoldSTAT PerOxy Kling on surface of tile and/or grout.
Allow a few minutes of dwell time on heavily soiled surfaces.
Agitate with a nylon brush to remove heavy soil deposits.
Rinse with water to remove solution.
Tile and grout will be sparkling clean and residue-free.
CARPETS AND UPHOLSTERY
Before using, always test for colorfastness in an inconspicuous area.
Remove all loose dirt from area to be cleaned.
Blot, if wet, soiled area with clean, color safe cloth or paper towel.
Spray soiled area and allow to penetrate stain for 3-5 minutes.
Blot with a clean, damp, colorfast cloth.
Rinse cloth and repeat until clean.
For carpets, vacuum when dry.
Do not use on leather or silk.
MOLD AND MILDEW:
Spray MOLDSTAT PerOxy Kling directly on mold and mildew.
Allow to remain on treated area for 3-5 minutes.
Rinse.
For heavily contaminated areas light scrubbing may be required.
RESTROOMS AND SHOWERS
For porcelain, fiberglass and stainless steel associated with restroom fixtures (urinals, sinks, tubs, etc.) apply MoldSTAT PerOxy Kling directly on surface and rub with sponge or cloth.
Rinse with clean water and allow to air dry or wipe dry with a clean cloth.
LAUNDRY
Remove any stain accumulation.
Saturate stained area with MOLDSTAT PerOxy Kling, rub into fabric and let stand for 5-10 minutes, then wash as usual.
For cleaning large areas
SUCH AS: Concrete, floors, roofs, fences, decks or exterior building walls, one apply with a pump-sprayer or bucket and mop using a 50/50 dilution ratio with water.
Apply liberally and let dwell for 5-10 minutes.
Scrub heavily contaminated areas, then rinse.
|
|
|
|
|
|
What related products did others buy? |
|
|
|
|
