MoldSTAT Plus Mold Killer: Easy to use & cost effective
Concentrated MoldSTAT Plus makes 21 gallons of mold killing solution, enough to cover 2000 sq feet of mold affected surfaces for less than $1.40 / gallon. Just follow these simple steps:
- Mix 3/4 oz (1 1/2 tablespoons) of MoldSTAT Plus into 1 gallon of Water.
- Apply to mold affected surfaces ( Application Methods )
- 10 minute soak time kills mold ( Optional: Wipe surface to remove dead mold )
Mold Killing : THE BLEACH MYTH
Chlorine Bleach (sodium hypochlorite 6%) does not kill mold.
Mold hyphae (root structures) actually grow into wood and drywall like roots. Bleach does not kill mold hyphae
because bleach's ion structure prevents chlorine from penetrating deep into surfaces (dry wall, concrete wood etc). Bleach stays on the outside surface, but mold has protected enzyme roots growing inside.
When you spray surface mold using bleach as a mold cleaner, the water part of the solution soaks into the wood while the bleach chemical sits atop the surface, gasses off. This only partially kills surface mold, but does not destroy mold roots. But the water penetration feeds the mold growth. So you think you did destroy mold, but it just seems to come back even thicker!
Mold Information from the EPA
MoldSTAT Plus is a non bleach, EPA Registered Mold Killer and Mildew Removal Product
. This mold killing solution won't damage colors, or fabrics. Kill mold without the smell or damage of bleach.
MoldSTAT Plus - Kills mold & more
Effective mold killer for mildew, germs and sewage bacteria and for black mold removal
Simple signs of mold and mildew include rotting lumber, moldy bathroom tiles, shower curtains and offensive odors with some health reactions like sore throats, aggravated allergies or respiratory problems. However, in certain cases, these mold microbes and biofilms (the food source, breeding ground & hiding place for mold & bacteria) can also climb to carcinogenic levels creating diseases ranging from cystic fibrosis to Legionnaires disease.
MoldSTAT Plus is fungicide, but it goes after more than just black mold. MoldSTAT Plus is bactericidal according to the
AOAC Use Dilution Test method modified in the presence of 5% Organic Serum against: MRSA, Staph, E-Coli, Strep and 31 other dangerous bacteria.
MoldSTAT Plus - Germ Coverage List
Why is this important? Bacteria coverage is essential when you are doing cleanup from floods or septic / sewer spills. Mold will start to grow within 24-48 hours of water damage, but most flooding also effects sanitation resulting in germ filled waste water soaking dry areas. Bactericidal MoldSTAT Plus kills the germs and the mold!
More Information about MoldSTAT Plus Sewer and Flooding uses
MoldSTAT Plus - Coverage
MoldSTAT Plus has 16oz of mold killing concentrate. Just mix 3/4 ounces to 1 gallon of water for a mold killing solution.
This container makes 21 gallons covers approximately 2000 sq ft.
What can I apply MoldSTAT Plus with?
MoldSTAT Plus is a non-bleach concentrate that is mixed with water then sprayed on to the mold infested areas. There are several ways to apply MoldSTAT Plus based:
- Mold Fogger:
The easy, electric way to apply. Using a fogger set on a coarse mist is the best approach to applying a mold when penetrating into tight spaces is required.
We recommend the Fogmaster Jr - mold removal fogger
- Pump Sprayer:
A pressurized or pump sprayer is useful to apply a more coarse spray. For low volumes we recommend a hand held sprayer like a Indoor Hand Sprayer or for larger applications a 2 Gallon Pump Up Sprayer
- Bucket and Sponge:
In some cases a simple bucket and sponge or rag approach will work.
Removing THICK Layers of mold
When mold is so thick that the surface of the affected area is not visible, it is necessary to clean and kill the surface layers to reach the mold roots. ( MoldSTAT Plus must contact the mold to kill it).
- After 10 minute soak, wipe surface down to remove dead surface mold;
- Determine if surface mold is gone by wiping a clean paper towel across the surface;
if paper towel shows color, repeat the application process to remove another layer of mold.
- A final application will now kill the mold roots.
*The earlier you treat the mold, the fewer applications will be needed
MoldSTAT Plus Customer Reviews
Read additional MoldSTAT product reviews at:
Mold Removal Product Reviews
Mold is on the run now!
Our family has been fighting MOLD and sick house syndrome for a while. We had been removing mold and mildew with bleach and making a mess of the basement walls, and our clothes. Imagine our surprise when we learned that Bleach can't chase the mold INTO the wall because its too big! We decided to go with
MoldSTAT mold killer and applied it with a pressure sprayer.
The difference has been tremendous! We sprayed the mold remover directly on the mold, and it got rid of it, and the mold has not come back! The price you charge seems low for how effective the MoldSTAT mold removal product really is, but it works!
Our family thanks you!
A Brooks from
Questions and Answers about MoldSTAT Plus
I need to remove Attic Mold
Attic Mold Removal Using MoldSTAT work?
Yes, MoldSTAT Plus is an effective solution for removing attic mold.
For More details : Eliminate Attic Mold Using MoldSTAT Plus
Basement Mold and Mildew Remover
Can MoldSTAT Plus be used for
Basement Mold and Mildew Removal?
Yes, MoldSTAT Plus is an effective solution for removing basement mold and mildew.
For More details : Basement Mold Removal Review